Electronic Controls for GAP
2300E Electronic Load Sharing and Speed Control Hardware
LOW COST – Steuerung mit analogen Load Sharing Line und Lastensensor. Nur Hardware, wird mit GAP programmiert.
8273-1017
2300E – Hardware Only, Ordinary Locations
8237-1018
2300E – Hardware Only, Zone 2 Hazardous Locations
*
Documentation: Product Spec: 03405, Manual: 26691
2301E Digital Load Sharing and Speed Control for Engines
Drehzahlregler und Steuerung mit Lastenverteilung und Lastensensor. Kann ebenfalls mit GAP programmiert werden.
8273-1011
2301E – ENGINE LSSC, 24VDC INPUT, ORDINARY LOCATION
8237-1012
2301E – ENGINE LSSC, 24VDC INPUT, HAZARDOUS LOCATION
Flex500 Platform
HIGH TEGH – Steuerung, nur Hardware. WIrd mit GAP programmiert, bzw. kann Programm mit Lizenz hochgeladen werden.
8200-1343
Flex500 – Front Panel Mount, LVDC, OCP
8200-1344
Flex500 – Front Panel Mount, HVAC/DC, OCP
8200-2345
Flex500 – Front Panel Mount, LVDC, Zone-2, OCP
8200-1353
Flex500 – Back Panel Mount, LVDC
8200-1354
Flex500 – Back Panel Mount, HVAC/DC
8200-2355
Flex500 – Back Panel Mount, LVDC, Zone-2
*
Documentation: Product Spec: 03433, Manual: 26838
Zubehör:
8447-5006
CSM – 505XT Core Source License
8447-5008
CSM – Vertex Core Source License
easyFlex* Free Programable Control
HIGH TEGH – Steuerung, nur Hardware. WIrd mit GAP programmiert, bzw. kann Programm mit Lizenz hochgeladen werden.
8440-2217
easYFLEX-3400XT-P2 (GAP)
*
Documentation: Manual: 37986
Turbine Controls and Associated Devices
2301E-ST Steam Turbine Controls
Steuerung auf Basis von 2300E – Hardware mit fertigem Programm für einstufigen Dampfturbien.
8273-1013
2301E-ST – Steam Turbine Control
8273-1014
2301E-ST – Steam Turbine Control, Hazardous Location Zone 2
*
Documentation Product Spec: 03407, Manual: 26694
Hydro Turbine Controls
LOW COST – Steuerung auf Basis von 2300E – Hardware
8237-2046
2301E-HT – Hydro Turbine Control (Francis), 24 VDC, Ordinary Location
*
Documentation Product Spec: 03459, Manual: 35092
Steuerung auf Basis von 505 – Hardware
8200-1400
505HT – LVDC, Pelton Turbines
8200-1401
505HT – HVAC/DC, Pelton Turbines
*
Documentation: Product Spec: 03460, Manual: 35116
8200-1402
505HT – LVDC, Francis / Kaplan Turbines
8200-1403
505HT – HVAC/DC, Francis / Kaplan Turbines
Zubehör:
8269-1073
17” TouchPanel OCP – Includes RemoteView Software Program
8928-5311
RemoteView – Software License
Peak200 Steam Turbine Controls
LOW COST – Dampfturbinensteuerung mit Turbinen mir einem HP-Valve
8200-1500
Peak200 – Bulkhead Mount, Low Voltage
8200-1501
Peak200 – Bulkhead Mount, High Voltage
8200-1502
Peak200 – Bulkhead Mount, LV, ATEX Zone 2
8200-1503
Peak200 – Front Panel Mount, LV
8200-1504
Peak200 – Front Panel Mount, HV
8200-1505
Peak200 – Front Panel Mount, LV, ATEX Zone 2
8200-1508
Peak200 – Bulkhead Mount, HV, Class1 Div2 Haz. Loc. Compliant
8200-1509
Peak200 – Front Panel Mount, HV, Class1 Div2 Haz. Loc. Compliant
*
Documentation Product Spec: 03438, Manual: 35051
505 Steam Turbine Controls
Dampfturbinensteuerung mit oder ohne Display
8200-1300
505 – LVDC, Ordinary Location
8200-1301
505 – HVAC/DC, Ordinary Location
8200-2302
505 – LVDC, ATEX, Zone 2 Hazardous
*
Documentation: Product Spec: 03422, Manuals: 26839V1, 26839V2
8200-1310
505-XT – LVDC, Ordinary Location
8200-1311
505-XT – HVAC/DC, Ordinary Location
8200-2312
505-XT – LVDC, Zone-2 Hazardous Location
*
Documentation: Product Spec: 03423, Manuals: 35018V1, 35018V2
8200-1330
505-DR – LVDC, Ordinary Location
8200-1331
505-DR – HVAC/DC, Ordinary Location
5541-705
Flex500DR FTM Kit – DR FTM, Interconnection Cables
*
Documentation: Product Spec: 03423, Manuals: 35018V1, 35018V2, 35018V3
Zubehör:
8200-1203
LinkNet-HT Analog 4-20 mA Module (8 AI and 2 AO)
8200-1200
LinkNet-HT RTD Module (8 RTD Inputs)
8200-1204
LinkNet-HT Discrete Input Module (16 DIs)
8200-1205
LinkNet-HT Discrete Output Module (16 DOs)
8928-5311
RemoteView Software License
ProTech® Overspeed Protection Devices
ProTech-SX
Überdrehzahlschutz mit einfacher Sicherheit
8237-1242
ProTech-SX – Panel Mount, HV/LV
8237-1243
ProTech-SX – Panel Mount, HV/HV
*
Documentation: Product Spec: 03372, Manuals: 26546V1, 26546V2
ProTech-GII
Überdrehzahlschutz mit 2oo3 – Sicherheit
*
Documentation: Product Spec: 03422, Manuals: 26839V1, 26839V2
8237-2594
ProTech-GII – Bulkhead Mount, HV/LV, Independent Relays
8237-2595
ProTech-GII – Bulkhead Mount, HV/HV, Independent Relays
8237-2596
ProTech-GII – Bulkhead Mount, HV/LV, Voted Relays
8237-2597
ProTech-GII – Bulkhead Mount, HV/HV, Voted Relays
8237-2598
ProTech-GII – Panel Mount, HV/LV, Independent Relays
8237-2599
ProTech-GII – Panel Mount, HV/HV, Independent Relays
8237-2600
ProTech-GII – Panel Mount, HV/LV, Voted Relays
8237-2561
ProTech-GII – Panel Mount, HV/HV, Voted Relays
*
Documentation: Product Spec: 03370, Manual: 35086
ProTech TPS
Überdrehzahlschutz mit 2oo3 – Sicherheit
8237-2602
ProTech TPS – Bulkhead Mount, HV/LV, Independent Relays
8237-2603
ProTech TPS – Bulkhead Mount, HV/HV, Independent Relays
8237-2604
ProTech TPS – Bulkhead Mount, HV/LV, Voted Relays
8237-2605
ProTech TPS – Bulkhead Mount, HV/HV, Voted Relays
8237-2606
ProTech TPS – Panel Mount, HV/LV, Independent Relays
8237-2607
ProTech TPS – Panel Mount, HV/HV, Independent Relays
8237-2608
ProTech TPS – Panel Mount, HV/LV, Voted Relays
8237-2609
ProTech TPS – Panel Mount, HV/HV, Voted Relays
*
Documentation: Product Spec: 03371, Manuals: 35059V1, 35059V2, 26712
MicroNet Safety Module
Überdrehzahlschutz mit 2oo3 – Sicherheit
8237-2492
MicroNet Safety Module – Bulkhead Mount, HV/LV, Independent Relays
8237-2493
MicroNet Safety Module – Bulkhead Mount, HV/HV, Independent Relays
8237-2494
MicroNet Safety Module – Bulkhead Mount, HV/LV, Voted Relays
8237-2495
MicroNet Safety Module – Bulkhead Mount, HV/HV, Voted Relays
8237-2496
MicroNet Safety Module – Panel Mount, HV/LV, Independent Relays
8237-2497
MicroNet Safety Module – Panel Mount, HV/HV, Independent Relays
8237-2498
MicroNet Safety Module – Panel Mount, HV/LV, Voted Relays
8237-2499
MicroNet Safety Module – Panel Mount, HV/HV, Voted Relays
*
Documentation: Product Spec: 03375, Manuals: 35060V1, 35060V2, 26712
Electro-Hydraulic Governors and Actuators
TG Turbine Governors
Hydraulischer Drehzahlregler für Dampfturbinen
9904-814
TG13 Screw, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 2010 rpm
9904-815
TG13 Screw, 2400 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-816
TG13 Screw, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-817
TG13 Lever, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-818
TG13 Lever, 4000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-819
TG13 Lever, 4000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-820
TG13 Screw, 4000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-821
TG13 Screw, 4000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-822
TG13 Screw, 6000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-823
TG13 Screw, 6000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-824
TG13 Lever, 2400 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-825
TG13 Lever, 6000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-826
TG13 Lever, 6000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-827
TG13 Screw, 2400 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 2010 rpm
9904-828
TG13 Screw, 4000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 4035 rpm
9904-800
TG17 Screw, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-801
TG17 Screw, 2400 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 1950 rpm
9904-802
TG17 Screw, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 2010 rpm
9904-803
TG17 Screw, 4000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 4035 rpm
9904-804
TG17 Screw, 4000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-805
TG17 Screw, 4000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 3910 rpm
9904-806
TG17 Screw, 6000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-807
TG17 Screw, 6000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 5860 rpm
9904-808
TG17 Lever, 2400 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 2010 rpm
9904-809
TG17 Lever, 2400 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 2010 rpm
9904-810
TG17 Lever, 4000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 4035 rpm
9904-811
TG17 Lever, 4000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 4035 rpm
9904-812
TG17 Lever, 6000 rpm, CCW Rotation, ATEX, Rated Speed @2° Droop = 6000 rpm
9904-813
TG17 Lever, 6000 rpm, CW Rotation, ATEX, Rated Speed @2° Droop = 6000 rpm
*
Documentation: Product Spec: 04038, Manual: 04042
TG611
Hydraulischer Drehzahlregler für Dampfturbinen
8516-174
TG to TG611 Conversion Kit
8516-175
TG611-13, Screw, 2400 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 2010 rpm
8516-176
TG611-13, Screw, 2400 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 2010 rpm
8516-177
TG611-13, Screw, 2400 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 1950 rpm
8516-178
TG611-13, Screw, 2400 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 1950 rpm
8516-179
TG611-13, Screw, 4000 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 4035 rpm
8516-180
TG611-13, Screw, 4000 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 4035 rpm
8516-181
TG611-13, Screw, 4000 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 3910 rpm
8516-182
TG611-13, Screw, 4000 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 3910 rpm
8516-183
TG611-13, Screw, 6000 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 6050 rpm
8516-184
TG611-13, Screw, 6000 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 6050 rpm
8516-185
TG611-17, Screw, 2400 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 1950 rpm
8516-186
TG611-17, Screw, 2400 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 2010 rpm
8516-187
TG611-17, Screw, 4000 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 4035 rpm
8516-188
TG611-17, Screw, 4000 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 4035 rpm
8516-189
TG611-17, Screw, 4000 rpm, CCW, ATEX, w/OTD, Rated Speed @2° Droop = 3910 rpm
8516-190
TG611-17, Screw, 6000 rpm, CCW, ATEX, w/ OTD, Rated Speed @2° Droop = 6050 rpm
8516-191
TG611-17, Screw, 6000 rpm, CW, ATEX, w/ OTD, Rated Speed @2° Droop = 6050 rpm
*
Documentation: Product Spec: 04038, Manual: 04042
TGE Turbine Actuators
Hydraulischer Aktuator für Dampfturbinen
9904-110
TGE13, 2400 rpm
9904-111
TGE13, 4000 rpm
9904-112
TGE13, 6000 rpm
9904-113
TGE17, 2400 rpm
9904-114
TGE17, 4000 rpm
9904-115
TGE17, 6000 rpm
*
Documentation: Product Spec: 04044, Manual: 04045
UG25+ Governors for Steam Turbines
Hydraulischen Drehzahlregler für Dampfturbinen
8528-122
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE LT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-123
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEYED DRIVE, .625 TERM SHAFTS, CCW ROT, OIL GAUGE RT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-132
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DRIVE, .625 TERM SHAFTS, CCW ROT, OIL GAUGE LT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-133
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE RT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-134
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEYED DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE RT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-135
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE LT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-136
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEYED DRIVE, .625 TERM SHAFTS, CCW ROT, OIL GAUGE RT,W/O STOP BUTTON, FOR STEAM TURBINE
8528-137
GOVERNOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEYED DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE RT,W/O STOP BUTTON, FOR STEAM TURBINE
*
Documentation: Product Spec: 03339, Manual: 26643
UG25+ Actuators
Hydraulischer Aktuator für Dampfturbinen und Großmotoren.
8528-027
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, KEY DRIVE, .750 TERM SHAFTS, CW ROT, OIL GAUGE RT, MAN
8528-028
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, SERR DRIVE, .750 TERM SHAFTS, CCW ROT, OIL GAUGE RT, MAN
8528-029
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, KEY DRIVE, .750 TERM SHAFTS, CCW ROT, OIL GAUGE RT, MAN
8528-033
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, KEY DRIVE, .750 TERM SHAFTS, CCW ROT, OIL GAUGE LT
8528-300
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, KEY DRIVE, .750 TERM SHAFTS, CW ROT, OIL GAUGE RT
8528-302
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, KEY DR, .750 TERM SHAFT, CCW ROT, OILGA LT
8528-303
ACTUATOR – P3, UG-25+, 25 LB FT, .875 PUMP, KEY DR, .625 TERM SHAFT, CW ROT, OILGA RT
8528-305
ACTUATOR – P3, UG-25+, 25 LB FT, .875 PUMP, KEY DR, .625 TERM SHAFT, CW ROT, OILGA LT
8528-307
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEY DR, .625 TERM SHAFT, CW ROT, OILGA RT
8528-308
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEY DR, .625 TERM SHAFT, CCW ROT, OILGA RT
8528-309
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, KEY DR, .625 TERM SHAFT, CW ROT, OILGA LT
8528-311
ACTUATOR – P3, UG-25+, 25 LB FT, .875 PUMP, SERR DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE LH
8528-312
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DRIVE, .625 TERM SHAFTS, CW ROT, OIL GAUGE LT
8528-313
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DR, .625 TERM SHAFT, CCW ROT, OILGA LT
8528-314
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DR, .625 TERM SHAFT, CW ROT, OILGA RT
8528-315
ACTUATOR – P3, UG-25+, 25 LB FT, .625 PUMP, SERR DR, .625 TERM SHAFT, CCW ROT, OILGA RT
8528-316
ACTUATOR – P3, UG-25+, 31 LB FT, .625 PUMP, KEY DRIVE, .750 TERM SHAFTS, CW ROT, OIL GAUGE LT
8528-320
ACTUATOR – P3, UG-25+, 31 LB FT, .625 PUMP, SERRATED DRIVE, .750 TERM SHAFTS, CW ROT, OIL GAUGE LT
8528-321
ACTUATOR – P3, UG-25+, 31 LB FT, .625 PUMP, SERRATED DRIVE, .750 TERM SHAFTS, CW ROT, OIL GAUGE RT
8528-322
ACTUATOR – P3, UG-25+, 31 LB FT, .625 PUMP, SERRATED DRIVE, .750 TERM SHAFTS, CCW ROT, OIL GAUGE LT
8528-324
ACTUATOR – P3, UG-25+, 25 LB FT, .875 PUMP, SERR DR, .625 TERM SHAFT, CW ROT, OIL GAUGE RT
8528-325
ACTUATOR – P3, UG-25+, 25 LB FT, .875 PUMP, SERR DR, .625 TERM SHAFT, CCW ROT, OIL GAUGE RT
8528-326
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, SERR DR, .750 TERM SHAFT, CW ROT, OIL GAUGE RT
8528-327
ACTUATOR – P3, UG-25+, 31 LB FT, .875 PUMP, SERR DR, .750 TERM SHAFT, CCW ROT, OIL GAUGE RT
*
Documentation: Product Spec: 03386, Manual: 26580
UG Actuators
Hydraulischer Aktuator für Dampfturbinen und Großmotoren.
8251-212
ACTUATOR – UG 2 MPU, CW, DOUBLE LIP DRIVE SEAL
8251-218
ACTUATOR – 14 PINS, HIGH SPEED, SERR, WITH 8923-631 BOOSTER T
8251-569
ACTUATOR – 14 PINS.HIGH SPEED.SERR.NO BOOSTER KIT
8251-711
ACTUATOR – UG8 LOW SPD CW WP
8251-716
ACTUATOR – UG 20 FT LB
8251-719
ACTUATOR – UG15 (SERR DR SHAFT, HI SPD, MPU)
8251-720
ACTUATOR – UG15 (KEYED DR SHAFT, HI SPD, MPU)
8251-724
ACTUATOR – UG15 (SERR DR SHAFT, MISS TOOTH TERM SHAFT, HI SPEED)
8251-734
ACTUATOR – UG15 (HIGH SPEED, SERR D/S, MARINE GLAND)
8251-735
ACTUATOR – UG15 (HIGH SPEED, FRENCH 31 D/S, MPU)
8251-737
ACTUATOR – UG15 (SERR D/S, HIGH SPEED)
8251-752
ACTUATOR – UG15 FT/LB, H.S, KEYED,DOUBLE LIPS
8251-758
ACTUATOR – UG15 SERR.DR.SHAFT/SERR.TERM.SHAFT/HI.SPD. /3 PIN
8251-759
ACTUATOR – UG15/KEY DR SHAFT/HI SPD/3 PIN
8251-760
ACTUATOR – UG20/SERR DR SHAFT/HI SPD/3 PIN
8251-762
ACTUATOR – UG20/SERR DR SHAFT/.625 D-TERM SHAFT/LO SPD/3 PIN
8251-763
ACTUATOR – UG15/SERR DR SHAFT/.562 D-TERM SHAFT/HI SPD/3 PIN
8251-0016
ACTUATOR – UG15 WITH SINGLE RH SERR T/S
8251-764
ACTUATOR – UG20/SERR DR SHAFT/.625 D-TERM SHAFT/LO SPD/10 PIN/LVDT
8251-765
ACTUATOR – UG15/SERR DR SHAFT/LO SPD/3 PIN
8251-766
ACTUATOR – UG20/SERR DR SHAFT/LO SPD/3 PIN
8251-767
ACTUATOR – UG20/PG ADPTR/SERR DR SHAFT/HI SPD/3 PIN
8251-768
ACTUATOR – UG20/PG ADPTR/SERR DR SHAFT/LO SPD/3 PIN
8251-769
ACTUATOR – UG15/PG ADPTR/SERR DR SHAFT/MISS TOOTH TERM SHAFT/LO SPD/3 PIN
8251-770
ACTUATOR – UG15/EXT KEY DR SHAFT/HI SPD/3 PIN
8251-771
ACTUATOR – UG15/PG ADPTR/SERR DR SHAFT/LO SPD/3 PIN
9907-261
ACTUATOR – UG20/SERR DR SHAFT/HI SPD/3 PIN/CSA
9907-262
ACTUATOR – UG15/KEY DR SHAFT/HI SPD/3 PIN/CSA
9907-444
ACTUATOR – CSA UG15 (SERR DRIVE SHAFT, LOW SPEED)
9907-448
ACTUATOR – UG15 SERR D/S, HI SPEED, 3 PINS, CSA
9907-878
ACTUATOR – UG20/SERR DR SHAFT/.625 D-TERM SHAFT/LO SPD/3 PIN/CSA
8251-0001
ACTUATOR – UG20 (KEYED D/S, LOW SPEED PUMP)
8251-0002
ACTUATOR – UG15 ACTUATOR W/HEAT EXCHANGER,
8251-0003
ACTUATOR – UG ACTUATOR (LOW SPD, KEY SHAFT)
8251-0004
ACTUATOR – UG 15 FT-LB SPECIAL DRIVE, HEAT EXCHANGER, MPU
8251-0005
ACTUATOR – UG15 HIGH PUMP 4PINS
8251-0006
ACTUATOR – UG MISSING SERR, MPU
8251-0008
ACTUATOR – UG15 WITH SINGLE RH SERR T/S
8251-0009
ACTUATOR – UG LOW SP, CW, MPU
8251-0010
ACTUATOR – UG ACTUATOR
8251-0015
ACTUATOR – UG20/EXT KEY DR SHAFT/LOW SPD/3 PIN
8251-0016
ACTUATOR – UG15 WITH SINGLE RH SERR T/S
8251-0018
ACTUATOR – UG20/SERR DR SHAFT/.625 D-TERM SHAFT/LO SPD/3 PIN
8915-2007
ACTUATOR – UG 15 FT LB REMOTE OIL PRESSURE
9907-1501
ACTUATOR – UG20 ACT(SERR T/S W/INDICATORS, PG ADAPTER, CSA)
9907-1508
ACTUATOR – UG15/EXTERNAL KEY DR SHAFT/HI SPD/3 PIN/CSA
8251-207-2
ACTUATOR – UG HI SPD,CCW,DOUBLE LIP DRIVE SEAL
*
Documentation: Product Spec: 37511, Manual: 37512
CPC-II Current-to-Pressure Converter
mA / Druck Konverter für hydraulische Antriebe.
9907-1200
CPC-II – 10 Bar, Class 1, Div. 2 (Zone 2)
9907-1199
CPC-II – 10 Bar, Class 1, Div. 1 (Zone 1 & 2)
9907-1198
CPC-II – 25 Bar, Class 1, Div. 2 (Zone 2)
9907-1197
CPC-II – 25 Bar, Class 1, Div. 1 (Zone 1 & 2)
9907-1253
CPC-II – Dual Redundant, Zone 2, 0-10 Bar model
9907-1254
CPC-II – Dual Redundant, Zone 2, 0-25 Bar model
8928-7240
CPC-II – Voith E360 Adapter Manifold
8923-2276
CPC-II – CPC-1 Converter Manifold
CPC-DX
AAAA
8918-116
CPC-DX – Dual Redundant Skid, Zone 2, 0-10 bar model
8918-118
CPC-DX – Dual Redundant Skid, Zone 2, 0-25 bar model
8923-1996
Kit – CPC Replacement, 10 Bar, Zone 2, CPC-DX Skid
8923-1997
Kit – CPC Replacement, 25 Bar, Zone 2, CPC-DX Skid
8923-2236
Kit – Replacement Isolation Valve, Right Hand, CPC 2 Control or Supply
8923-2242
Kit – Replacement Isolation Valve, Left Hand, CPC 1 Control or Supply
8923-2237
Kit – Pressure Gauge, 10 Bar, CPC-DX Skid
8923-2238
Kit – Pressure Gauge, 25 Bar, CPC-DX Skid
8923-2239
Kit – Shuttle Valve, CPC-DX Skid
*
Documentation: Product Spec: 03421, Manual: 26758
TM Actuators (Linear)
AAAA
9907-1213
TM-25LP, Single Coil, Extend
9907-1214
TM-25LP, Single Coil, Retract
9905-658
TM-25LP, Dual Coil, Extend w/o Feedback
9905-657
TM-25LP, Dual Coil, Retract w/o Feedback
9907-1235
TM-200LP, Single Coil, Extend
9907-1225
TM-200LP, Single Coil, Retract
*
Documentation: Product Spec: 82451, Manual: 82450
Turbine Shutdown Trip Block Assemblies
Quick Tripp
AAAA
0-9907-2108
QuickTrip – SIL-3, Chemically Resistant Seals, Ordinary Location
1-9907-2108
QuickTrip – SIL-3, Chemically Resistant Seals, Zone 1 & 2 Location
2-9907-2108
QuickTrip – SIL-3, Chemically Resistant Seals, Zone 2 Location
0-9907-1978
QuickTrip – SIL-3, Ordinary Location
1-9907-1978
QuickTrip – SIL-3, Zone 1 & 2 Location
2-9907-1978
QuickTrip – SIL-3, Zone 2 Location
QuickTrip Spare Parts
8923-2192
Specialized Tools Kit
8923-2142
Solenoid (LAT) Replacement Kit
8923-2143
Sight Window Replacement Kit
8923-2690
Top Cover Replacement Kit (Painted)
8923-2144
Top Cover Replacement Kit (Unpainted)
8923-2145
Bottom Cover Replacement Kit
8923-2146
PCBA Replacement Kit
8923-2147
Return Spring Replacement Kit
8923-2191
Rotor Replacement Kit
*
Documentation: Product Spec: 03415, Manual: 26815
*
Documentation: Field Repair Manual: 26842
Digital Actuators
L-Series Actuators and Integrated Speed Controls
Ein Stellglied mit integriertem Regler und Drehmoment bis zu 0,34 Nm und 60° Bewegung.
L-Series Speed Control–Actuator Only
8404-7101
L-Series Act., Type 6 Shaft, Std Cvr, Spd Ctrl w/o CAN, Dflt Pmtrs
L-Series Speed Control–Actuator with ITB
8404-7207
L-Series ITB, 36 mm, Spd Ctrl, Dflt Pmtrs
8404-7208
L-Series ITB, 43 mm, Spd Ctrl, Dflt Pmtrs
L-Series Process Control with ITB
8404-7301
L-Series Trim Valve, 16 mm, Process Ctrl, Dflt Pmtrs
8404-7302
L-Series Trim Valve, 22 mm, Process Ctrl, Dflt Pmtrs
8404-2061
L-Series ITB, 25 mm Sealed, Process Ctrl, Dflt Pmtrs, N/C
8404-2062
L-Series ITB, 30 mm Sealed, Process Ctrl, Dflt Pmtrs, N/C
8404-2063
L-Series ITB, 36 mm Sealed, Process Ctrl, Dflt Pmtrs, N/C
8404-2064
L-Series ITB, 43 mm Sealed, Process Ctrl, Dflt Pmtrs, N/C
8404-2065
L-Series ITB, 50 mm Sealed, Process Ctrl, Dflt Pmtrs, N/C
*
Manual: B26249
L-Series Speed Control–Actuator with ITB & Venturi Mixer (MAS)
Drehzahlregler mit integriertem Mischer für kleine Gasmotoren.
8404-4001
L-Series LC50, 25 mm ITB, 27 mm X-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-4002
L-Series LC50, 30 mm ITB, 19 mm O-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-4003
L-Series LC50, 36 mm ITB, 23 mm O-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7404
L-Series LC50, 43 mm ITB, 29 mm O-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7405
L-Series LC50, 50 mm ITB, 36 mm O-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7406
L-Series LC50, 30 mm ITB, 30 mm X-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7407
L-Series LC50, 36 mm ITB, 34 mm X-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7408
L-Series LC50, 43 mm ITB, 40 mm X-MIX, MAS, Spd Ctrl, Dflt Pmtrs
8404-7409
L-Series LC50, 50 mm ITB, 47 mm X-MIX, MAS, Spd Ctrl, Dflt Pmtrs
*
Manual: B26249
L-Series Diesel Act. Applications
ein integrierbarer Drehzahlregler zum Umbau der Dieselaggregate mit Stanadyne, bzw. Delphi – Einspritzpumpen
8404-7503
L-Series DER, Stanadyne Cvr/Shft, Spd Ctrl w/o CAN, Stana Pmtrs
8404-7504
L-Series DER, Delphi Cvr/Shft w/Lvr, Spd Ctrl w/o CAN, Dflt Pmtrs
*
Manual: B26250
L-Series Positioner with ITB
Ein Ventil mit integrierten Drosselklappen.
8404-7303
L-Series Trim Valve, 16 mm, Pos Ctrl, Dflt Pmtrs
8404-7304
L-Series Trim Valve, 22 mm, Pos Ctrl, Dflt Pmtrs
8404-7213
L-Series ITB, 25 mm Sealed, Pos Ctrl, PWM, N/C
8404-7214
L-Series ITB, 30 mm Sealed, Pos Ctrl, PWM, N/C
8404-7215
L-Series ITB, 36 mm Sealed, Pos Ctrl, PWM, N/C
8404-7216
L-Series ITB, 43 mm Sealed, Pos Ctrl, PWM, N/C
8404-7217
L-Series ITB, 50 mm Sealed, Pos Ctrl, PWM, N/C
8404-7257
L-Series ITB, 36 mm Sealed, Pos Ctrl, PWM, N/O
*
Manual: B26249
F-Series Positioners
Positioner mit analog, bzw PWM Eingang für Drehmomente bis 2,71 Nm und 70° Bewegung.
8245-001
F-Series Actuator, Std Shaft, 23-pin
8245-027
F-Series 33 mm ITB, Std Mount, 23-pin, Plan A
8245-003
F-Series 60 mm ITB, Std Mount, 23-pin, Plan A, Factory Default SW
8245-004
F-Series 68 mm ITB, Std Mount, 23-pin, Plan A, Factory Default SW
8245-020
F-Series 75 mm ITB, FLOTECH 23-pin, Plan A
8245-030
F-Series 68 mm ITB, Std Mount, 23-pin, Plan B, Flo-Tech Flow Curve
8245-033
F-Series 48 mm ITB, Std Mount, 23-pin, Plan B, Flo-Tech Sch, N/O
8245-026
F-Series 60 mm ITB, Std Mount, 23-pin, Plan A, Flo-Tech Sch, N/O
8425-018
F-Series 68 mm ITB, Std Mount, 23-pin, Plan A, Flo-Tech Scn, N/O
Accessories
8923-1312
Kit-F-Series 23-Pin Mating Connector (23-pin kit)
8923-1255
Kit-F-Series Communication Hardware, 23 Pin (23-pin kit)
R-Series Actuators
AAAA
8410-007
R 11 Positioner (11 Nm)
8410-008
R 30 Positioner (30 Nm)
8410-010
R120 Positioner (120 Nm)
*
Documentation: Product Spec 03434; Manual 26729, B26845
ProAct Positioner (16 pin), 3rd Generation
ein Closed Loop Actuator mit guter Dynamik. Wahlweise 5.2 Nm (Model II) oder 10.4 Nm (Model III)
8404-302
ProAct Model II
8404-303
ProAct Model III
ACS06E24-28S-472
16 Pin Amphenol – Steckverbinder
*
Documentation: Product Spec 04126; Manual 26914 (non-flex)
ProAct Positioner (Flex I/O)
AAAA
8404-307
PROACT GEN3 FLEX, MODEL II (BLANK, 0-5 Vdc in, 4-20 mA out)
8404-308
PROACT GEN3 FLEX, MODEL III
8404-309
PROACT GEN3 FLEX, MODEL IV
*
*Documentation: Manual B26915
ProAct ITB, 3rd Generation
AAAA
8335-003
105 MM ITB, PROACT GEN3 MODEL II (GENERAL SALE)
8335-004
120 MM ITB, PROACT GEN3 MODEL II (GENERAL SALE)
8335-005
135 MM ITB, PROACT GEN3 MODEL III (GENERAL SALE)
*
Documentation: Manual B26168
IPCS Power Management and Power Generation Controls
easYgen-100 Line / Autostart Controls
Billige start/stopp – Genset Steuerung ohne Synchronisation mit Motor- und Generator- Überwachungsfunktionen
8440-2250
easYgen-400 / Manual: 37884, 37890
8440-2252
easYgen-600 / Manual: 37698, 37786
8440-2254
easYgen-800 / Manual: 37691, 37692
*
Documentation: Product Spec: 37697
easYgen-1000 Line / AMF Automatic Mains Failure Controls
Billige Netzersatz – Genset Steuerung ohne Synchronisation mit Motor- und Generator- Überwachungsfunktionen
8440-2251
easYgen-1400 / Manual: 37799, 37889
8440-2253
easYgen-1600 / Manual: 37699, 37785
8440-2256
easYgen-1700 / Manual: 37798, 37888
8440-2255
easYgen-1800 / Manual: 37685, 37690
*
Documentation: Product Spec: 37686
easYgen-2000 Simple ParallelingeasYgen-2000 Simple Paralleling
Günstige Genset – Steuerung mit Notstromfunktionen und Synchronisierung sowohl an nationales Netz oder Muli-Inselbetrieb.
8440-1855
easYgen-2200-5/P1
8440-1856
easYgen-2200-1/P1
8440-1857
easYgen-2200-5/P2
8440-1858
easYgen-2200-1/P2
8440-2080
easYgen-2300-5/P1
8440-2122
easYgen-2300-1/P1
8440-2058
easYgen-2300-5/P2
8440-2123
easYgen-2300-1/P2
8440-1884
easYgen-2500-5/P1
8440-1860
easYgen-2500-1/P1
*
Documentation: Product Spec: 37548, Manual: 37535
8440-2029
easYgen-2500-5/P1-K33 Rental Version
8440-2096
easYgen-2500-1/P1-K33 Rental Version
*
Documentation: Product Spec: 37553, Manual: 37537
easYgen-3100XT/3200XT Complex Paralleling
Fortschrittliche Generatorsteuerung mit Sammelschiene, Notstromfunktionen usw…
8440-2081
easYgen-3100XT
8440-2083
easYgen-3200XT-LT
8440-2082
easYgen-3200XT
*
Documentation: Product Spec: 37582, Manual: 37574
easYgen-3400XT/3500XT Complex Paralleling
Fortschrittliche Generatorsteuerung mit Sammelschiene, Notstromfunktionen, automatischen Segmentierung usw… Wird meistens mit LS6XT benutzt.
8440-2084
easYgen-3400XT-P1
8440-2087
easYgen-3400XT-P2
8440-2085
easYgen-3500XT-P1
8440-2086
easYgen-3500XT-P1-LT
8440-2088
easYgen-3500XT-P2
8440-2089
easYgen-3500XT-P2-LT
8440-2318
easYgen-3500XT-P2-K58
*
Documentation: Product Spec: 37583, Manual: -P1 37580, – P2 37581
*
Documentation: K58 MTU MDEC+Legacy CAN Manual 37959, 37960
LS-5 Breaker Controls for easYgen-3400XT/3500XT Packages CANopen Communication
Leistungsschalter Überwachungs-, Steuergerät für easYgen 3400XT/3500XT
Backpanel Version 1 Breaker
8440-2152
LS-511-5/P1
8440-2180
LS-511-1/P1
Display Version 1 Breaker
8440-2150
LS-521-5/P1
8440-2178
LS-521-1/P1
*
Documentation: Product Spec: 37661, Manual: 37649
Backpanel Version 2 Breaker
8440-2153
LS-512-5/P1
8440-2181
LS-512-1/P1
Display Version 2 Breaker
8440-2151
LS-522-5/P1
8440-2179
LS-522-1/P1
*
Documentation: Product Spec: 37665, Manual: 37650
LS-6XT Breaker Controls for easYgen-3400XT/3500XT Packages Redundant E-Net Communication
flexibler Leistungsschalter Steuergerät mit Überwachungs und Synchronisierfunktionen.
8440-2222
LS-612XT-P1
*
Documentation: Product Spec: 37913, Manual: 37914
8440-2317
LS-612XT-P2
*
Documentation: Product Spec: 37913, Manual: 37982
GC-3400XT Group Controller
Group Controller für Systemmen mit mehr als 32 easYgens
8440-2267
GC-3400XT-P1
*
Documentation: Product Spec: 37921, Manual: 37922
easY-I* Control for Inverter-Based Power Systems
Steuergerät für Batteriespeicher / Inverter
8440-2292
easY-I-3500XT-P1
8440-2293
easY-I-3400XT-P1
*
Documentation: Manual: 37957
Remote Panel for easYgen-3000XT, LS6XT
Remote Display für easYgen300XT, LS6XT…
8446-1071
easYview-07-30
8446-1072
easYview-10-60
*
Documentation: Product Spec: 37951, Manual: 37945
Accessories for easYgen
DPC Kabel. Zum Parametrieren von easYgen2000, SPMD, LS5, IKDM, GCP30, MFR…
5417-1251
DPC-USB Configuration Cable
CAN-OPEN Erweiterungskarte mit 8 bipolaren DI/8 Relais
8440-2116
IKD1M 8 DI/8 DO Expansion Card
*
Documentation: Product Spec: 37171, Manual: 37135
CAN-OPEN Erweiterungskarte mit 16 digitalen Eingängen
8440-2307
IKD-IN-16 16 DI Expansion Card
CAN-OPEN Erweiterungskarte mit 16 digitalen Relaisausgängen
8440-2306
IKD-OUT-16 16 DO Expansion Card
*
Documentation: Product Spec: 37985, Manual: 37968
CAN-OPEN – Profibus Konverter für easYgen3000
8440-2306
IKD-OUT-16 16 DO Expansion Card
*
Documentation: Manual: 37577
8445-1046
ESEPRO
DSLC-2XT and MSLC-2XT Switchgear Paralleling Controls
Generatorsteuergerät DTSC mit Leistungsschalter – Steuergerät MSLC
8440-2299
DSLC-2XT
*
Documentation: Product Spec: 37963, Manual: 37948
8440-2298
MSLC-2XT
*
Documentation: Product Spec: 37962, Manual: 37947
Automatische Transfer Switch Control
Autamatische Umschaltung zwischen Haupt-/Backup – Versorgung der alten Generatiron
8440-1867
DTSC-200-51B
8440-1868
DTSC-200-55B
8440-2155
DTSC-200-55B/K38
*
Documentation: Product Spec: 37398, Manual: 37482, 37483, 37484, 37485, 37486
Autamatische Umschaltung zwischen Haupt-/Backup – Versorgung der neuen Generatiron
8440-2297
DTSC-200A
*
Documentation: Product Spec: 37944, Manual: 37939,37940, 37941, 37942, 37943
SPM-D2 Synchronizers
Ein- Funktion Synchronisiergeräte
2 Phase Paralleling
8440-2164
SPM-D2-1040B /400VAC sensing
8440-2166
SPM-D2-1010B /110VAC sensing
8440-2175
SPM-D2-1040B/N wide range power supply
8440-2174
SPM-D2-1010B/N wide range power supply
8440-2171
SPM-D2-1040B/X analog speed/voltage bias
8440-2168
SPM-D2-1010B/X analog speed/voltage bias
8440-2190
SPM-D2-1040B/XN analog speed/voltage bias, wide range power supply
8440-2172
SPM-D2-1010B/XN analog speed/voltage bias, wide range power supply
*
Documentation: Product Spec: 37622, Manual: 37615
8440-2170
SPM-D2-10B/PSY5-FU-D
8440-2173
SPM-D2-10B/PSY5-FU-D-W wide range power supply
*
Documentation: Product Spec: 37622, Manual: 37616
2 Phase Paralleling with Single Phase CT Sensing and kW and kVAR Anlog Load Sharing Lines
8440-2169
SPM-D2-1145B/LSXR
8440-2165
SPM-D2-1115B/LSXR
*
Documentation: Product Spec: 37623, Manual: 37618
3 Phase Paralleling
8440-2176
SPM-D2-1040B/YB
8440-2167
SPM-D2-1010B/YB
8440-2189
SPM-D2-1040B/NYB
8440-2177
SPM-D2-1010B/NYB
*
Documentation: Product Spec: 37622, Manual: 37617